耐冲击锂电池 - 车载电池

发布时间:2018-08-26 01:20:49

HSV电源盒专为WA LED照明提供独立电源。它的输出电压为22-26V,总输出为 1,200 watt,最多可以智能连接四个摄像头 ,LCD显示目前电池的电量状态。 如果电压过低时,显示器会闪烁红色的信号并且发出声音信号。智能电池还可 以通过远程控制开和关的设置。LED显示在充电周期时的瞬间电荷状态。在充 电的过程中按下控制键,显示屏会清楚地显示瞬间的充电

HSV电源盒专为WA LED照明提供独立电源。它的输出电压为22-26V,总输出为 1,200 watt,最多可以智能连接四个摄像头 ,LCD显示目前电池的电量状态。
 如果电压过低时,显示器会闪烁红色的信号并且发出声音信号。智能电池还可 以通过远程控制开和关的设置。LED显示在充电周期时的瞬间电荷状态。在充
 电的过程中按下控制键,显示屏会清楚地显示瞬间的充电讯息。电池技术最多 可达2,000个充电/放电周期。

The HSVPower Box is designed to enable WA LEDlighting to operate independently ofmains power supply. Its output voltageof 22 - 26 V provides a total output of1,200 watt, meaning that a WA-LED systemfitted with two lamp heads can operateunder full load for up to 14 minutes.The battery is protected againstovercharging and deep discharge; the LCDindicates the current charge level andan acoustic signal warns when the chargelevel drops too low.

Up tofour cameras can be connected to the IES4751 Smart Battery. A maximum capacityof 4 Ah is available at a nominal outputvoltage of 16 V. The four power outputsare individually protected against surgecurrent and automatically switch onagain following an overload. If a shortcircuit occurs at one output, the otheroutputs remain operational. The batteryis protected against overcharging, deepdischarge, and overheating. A status LCDindicates the current state of charge.If the charge level drops too low, thedisplay will blink red and an acousticsignal will sound. The Smart Batteryalso has a remote input, allowing it tobe switched on and off with a remotecontrol. An LED indicates the momentarystate of charge during the chargingcycle. Press the control button duringcharging and an additional plain textmessage will appear briefly showing thestate of charge. The (new) batterytechnology employed allows up to 2000charge/discharge cycles.


 注:产品信息若有变更恕不另行通知


电话咨询
产品中心
在线订购
QQ客服